110 lines
2.9 KiB
C++
110 lines
2.9 KiB
C++
/*
|
|
WiFiEsp example: WiFi UDP Send and Receive String
|
|
|
|
This sketch wait an UDP packet on localPort using a WiFi shield.
|
|
When a packet is received an 'ACK' packet is sent to the client on port remotePort.
|
|
|
|
For more details see: http://yaab-arduino.blogspot.com/p/wifiesp-example-client.html
|
|
*/
|
|
|
|
|
|
#include <WiFiEsp.h>
|
|
#include <WiFiEspUdp.h>
|
|
|
|
// Emulate Serial1 on pins 6/7 if not present
|
|
#ifndef HAVE_HWSERIAL1
|
|
#include "SoftwareSerial.h"
|
|
SoftwareSerial Serial1(6, 7); // RX, TX
|
|
#endif
|
|
|
|
char ssid[] = "Twim"; // your network SSID (name)
|
|
char pass[] = "12345678"; // your network password
|
|
int status = WL_IDLE_STATUS; // the Wifi radio's status
|
|
|
|
unsigned int localPort = 10002; // local port to listen on
|
|
|
|
char packetBuffer[255]; // buffer to hold incoming packet
|
|
char ReplyBuffer[] = "ACK"; // a string to send back
|
|
|
|
WiFiEspUDP Udp;
|
|
|
|
void setup() {
|
|
// initialize serial for debugging
|
|
Serial.begin(115200);
|
|
// initialize serial for ESP module
|
|
Serial1.begin(9600);
|
|
// initialize ESP module
|
|
WiFi.init(&Serial1);
|
|
|
|
// check for the presence of the shield:
|
|
if (WiFi.status() == WL_NO_SHIELD) {
|
|
Serial.println("WiFi shield not present");
|
|
// don't continue:
|
|
while (true);
|
|
}
|
|
|
|
// attempt to connect to WiFi network
|
|
while ( status != WL_CONNECTED) {
|
|
Serial.print("Attempting to connect to WPA SSID: ");
|
|
Serial.println(ssid);
|
|
// Connect to WPA/WPA2 network
|
|
status = WiFi.begin(ssid, pass);
|
|
}
|
|
|
|
Serial.println("Connected to wifi");
|
|
printWifiStatus();
|
|
|
|
Serial.println("\nStarting connection to server...");
|
|
// if you get a connection, report back via serial:
|
|
Udp.begin(localPort);
|
|
|
|
Serial.print("Listening on port ");
|
|
Serial.println(localPort);
|
|
}
|
|
|
|
void loop() {
|
|
|
|
// if there's data available, read a packet
|
|
int packetSize = Udp.parsePacket();
|
|
if (packetSize) {
|
|
Serial.print("Received packet of size ");
|
|
Serial.println(packetSize);
|
|
Serial.print("From ");
|
|
IPAddress remoteIp = Udp.remoteIP();
|
|
Serial.print(remoteIp);
|
|
Serial.print(", port ");
|
|
Serial.println(Udp.remotePort());
|
|
|
|
// read the packet into packetBufffer
|
|
int len = Udp.read(packetBuffer, 255);
|
|
if (len > 0) {
|
|
packetBuffer[len] = 0;
|
|
}
|
|
Serial.println("Contents:");
|
|
Serial.println(packetBuffer);
|
|
|
|
// send a reply, to the IP address and port that sent us the packet we received
|
|
Udp.beginPacket(Udp.remoteIP(), Udp.remotePort());
|
|
Udp.write(ReplyBuffer);
|
|
Udp.endPacket();
|
|
}
|
|
}
|
|
|
|
|
|
void printWifiStatus() {
|
|
// print the SSID of the network you're attached to:
|
|
Serial.print("SSID: ");
|
|
Serial.println(WiFi.SSID());
|
|
|
|
// print your WiFi shield's IP address:
|
|
IPAddress ip = WiFi.localIP();
|
|
Serial.print("IP Address: ");
|
|
Serial.println(ip);
|
|
|
|
// print the received signal strength:
|
|
long rssi = WiFi.RSSI();
|
|
Serial.print("signal strength (RSSI):");
|
|
Serial.print(rssi);
|
|
Serial.println(" dBm");
|
|
}
|