145 lines
3.8 KiB
Plaintext
145 lines
3.8 KiB
Plaintext
#include <OneWire.h>
|
|
#include <DallasTemperature.h>
|
|
|
|
// Data wire is plugged into port 2 on the Arduino
|
|
#define ONE_WIRE_BUS 2
|
|
|
|
// Setup a oneWire instance to communicate with any OneWire devices (not just Maxim/Dallas temperature ICs)
|
|
OneWire oneWire(ONE_WIRE_BUS);
|
|
|
|
// Pass our oneWire reference to Dallas Temperature.
|
|
DallasTemperature sensors(&oneWire);
|
|
|
|
// arrays to hold device addresses
|
|
DeviceAddress insideThermometer, outsideThermometer;
|
|
|
|
// function that will be called when an alarm condition exists during DallasTemperatures::processAlarms();
|
|
void newAlarmHandler(uint8_t* deviceAddress)
|
|
{
|
|
Serial.println("Alarm Handler Start");
|
|
printAlarmInfo(deviceAddress);
|
|
printTemp(deviceAddress);
|
|
Serial.println();
|
|
Serial.println("Alarm Handler Finish");
|
|
}
|
|
|
|
void printCurrentTemp(DeviceAddress deviceAddress)
|
|
{
|
|
printAddress(deviceAddress);
|
|
printTemp(deviceAddress);
|
|
Serial.println();
|
|
}
|
|
|
|
void printAddress(DeviceAddress deviceAddress)
|
|
{
|
|
Serial.print("Address: ");
|
|
for (uint8_t i = 0; i < 8; i++)
|
|
{
|
|
if (deviceAddress[i] < 16) Serial.print("0");
|
|
Serial.print(deviceAddress[i], HEX);
|
|
}
|
|
Serial.print(" ");
|
|
}
|
|
|
|
void printTemp(DeviceAddress deviceAddress)
|
|
{
|
|
float tempC = sensors.getTempC(deviceAddress);
|
|
if (tempC != DEVICE_DISCONNECTED_C)
|
|
{
|
|
Serial.print("Current Temp C: ");
|
|
Serial.print(tempC);
|
|
}
|
|
else Serial.print("DEVICE DISCONNECTED");
|
|
Serial.print(" ");
|
|
}
|
|
|
|
void printAlarmInfo(DeviceAddress deviceAddress)
|
|
{
|
|
char temp;
|
|
printAddress(deviceAddress);
|
|
temp = sensors.getHighAlarmTemp(deviceAddress);
|
|
Serial.print("High Alarm: ");
|
|
Serial.print(temp, DEC);
|
|
Serial.print("C");
|
|
Serial.print(" Low Alarm: ");
|
|
temp = sensors.getLowAlarmTemp(deviceAddress);
|
|
Serial.print(temp, DEC);
|
|
Serial.print("C");
|
|
Serial.print(" ");
|
|
}
|
|
|
|
void setup(void)
|
|
{
|
|
// start serial port
|
|
Serial.begin(9600);
|
|
Serial.println("Dallas Temperature IC Control Library Demo");
|
|
|
|
// Start up the library
|
|
sensors.begin();
|
|
|
|
// locate devices on the bus
|
|
Serial.print("Found ");
|
|
Serial.print(sensors.getDeviceCount(), DEC);
|
|
Serial.println(" devices.");
|
|
|
|
// search for devices on the bus and assign based on an index
|
|
if (!sensors.getAddress(insideThermometer, 0)) Serial.println("Unable to find address for Device 0");
|
|
if (!sensors.getAddress(outsideThermometer, 1)) Serial.println("Unable to find address for Device 1");
|
|
|
|
Serial.print("Device insideThermometer ");
|
|
printAlarmInfo(insideThermometer);
|
|
Serial.println();
|
|
|
|
Serial.print("Device outsideThermometer ");
|
|
printAlarmInfo(outsideThermometer);
|
|
Serial.println();
|
|
|
|
// set alarm ranges
|
|
Serial.println("Setting alarm temps...");
|
|
sensors.setHighAlarmTemp(insideThermometer, 26);
|
|
sensors.setLowAlarmTemp(insideThermometer, 22);
|
|
sensors.setHighAlarmTemp(outsideThermometer, 25);
|
|
sensors.setLowAlarmTemp(outsideThermometer, 21);
|
|
|
|
Serial.print("New insideThermometer ");
|
|
printAlarmInfo(insideThermometer);
|
|
Serial.println();
|
|
|
|
Serial.print("New outsideThermometer ");
|
|
printAlarmInfo(outsideThermometer);
|
|
Serial.println();
|
|
|
|
// attach alarm handler
|
|
sensors.setAlarmHandler(&newAlarmHandler);
|
|
|
|
}
|
|
|
|
void loop(void)
|
|
{
|
|
// ask the devices to measure the temperature
|
|
sensors.requestTemperatures();
|
|
|
|
// if an alarm condition exists as a result of the most recent
|
|
// requestTemperatures() request, it exists until the next time
|
|
// requestTemperatures() is called AND there isn't an alarm condition
|
|
// on the device
|
|
if (sensors.hasAlarm())
|
|
{
|
|
Serial.println("Oh noes! There is at least one alarm on the bus.");
|
|
}
|
|
|
|
// call alarm handler function defined by sensors.setAlarmHandler
|
|
// for each device reporting an alarm
|
|
sensors.processAlarms();
|
|
|
|
if (!sensors.hasAlarm())
|
|
{
|
|
// just print out the current temperature
|
|
printCurrentTemp(insideThermometer);
|
|
printCurrentTemp(outsideThermometer);
|
|
}
|
|
|
|
delay(1000);
|
|
}
|
|
|