252 lines
6.7 KiB
C++
252 lines
6.7 KiB
C++
#ifndef DallasTemperature_h
|
|
#define DallasTemperature_h
|
|
|
|
#define DALLASTEMPLIBVERSION "3.7.9" // To be deprecated
|
|
|
|
// This library is free software; you can redistribute it and/or
|
|
// modify it under the terms of the GNU Lesser General Public
|
|
// License as published by the Free Software Foundation; either
|
|
// version 2.1 of the License, or (at your option) any later version.
|
|
|
|
// set to true to include code for new and delete operators
|
|
#ifndef REQUIRESNEW
|
|
#define REQUIRESNEW false
|
|
#endif
|
|
|
|
// set to true to include code implementing alarm search functions
|
|
#ifndef REQUIRESALARMS
|
|
#define REQUIRESALARMS true
|
|
#endif
|
|
|
|
#include <inttypes.h>
|
|
#include <OneWire.h>
|
|
|
|
// Model IDs
|
|
#define DS18S20MODEL 0x10 // also DS1820
|
|
#define DS18B20MODEL 0x28
|
|
#define DS1822MODEL 0x22
|
|
#define DS1825MODEL 0x3B
|
|
#define DS28EA00MODEL 0x42
|
|
|
|
// Error Codes
|
|
#define DEVICE_DISCONNECTED_C -127
|
|
#define DEVICE_DISCONNECTED_F -196.6
|
|
#define DEVICE_DISCONNECTED_RAW -7040
|
|
|
|
typedef uint8_t DeviceAddress[8];
|
|
|
|
class DallasTemperature {
|
|
public:
|
|
|
|
DallasTemperature();
|
|
DallasTemperature(OneWire*);
|
|
|
|
void setOneWire(OneWire*);
|
|
|
|
// initialise bus
|
|
void begin(void);
|
|
|
|
// returns the number of devices found on the bus
|
|
uint8_t getDeviceCount(void);
|
|
|
|
// returns the number of DS18xxx Family devices on bus
|
|
uint8_t getDS18Count(void);
|
|
|
|
// returns true if address is valid
|
|
bool validAddress(const uint8_t*);
|
|
|
|
// returns true if address is of the family of sensors the lib supports.
|
|
bool validFamily(const uint8_t* deviceAddress);
|
|
|
|
// finds an address at a given index on the bus
|
|
bool getAddress(uint8_t*, uint8_t);
|
|
|
|
// attempt to determine if the device at the given address is connected to the bus
|
|
bool isConnected(const uint8_t*);
|
|
|
|
// attempt to determine if the device at the given address is connected to the bus
|
|
// also allows for updating the read scratchpad
|
|
bool isConnected(const uint8_t*, uint8_t*);
|
|
|
|
// read device's scratchpad
|
|
bool readScratchPad(const uint8_t*, uint8_t*);
|
|
|
|
// write device's scratchpad
|
|
void writeScratchPad(const uint8_t*, const uint8_t*);
|
|
|
|
// read device's power requirements
|
|
bool readPowerSupply(const uint8_t*);
|
|
|
|
// get global resolution
|
|
uint8_t getResolution();
|
|
|
|
// set global resolution to 9, 10, 11, or 12 bits
|
|
void setResolution(uint8_t);
|
|
|
|
// returns the device resolution: 9, 10, 11, or 12 bits
|
|
uint8_t getResolution(const uint8_t*);
|
|
|
|
// set resolution of a device to 9, 10, 11, or 12 bits
|
|
bool setResolution(const uint8_t*, uint8_t,
|
|
bool skipGlobalBitResolutionCalculation = false);
|
|
|
|
// sets/gets the waitForConversion flag
|
|
void setWaitForConversion(bool);
|
|
bool getWaitForConversion(void);
|
|
|
|
// sets/gets the checkForConversion flag
|
|
void setCheckForConversion(bool);
|
|
bool getCheckForConversion(void);
|
|
|
|
// sends command for all devices on the bus to perform a temperature conversion
|
|
void requestTemperatures(void);
|
|
|
|
// sends command for one device to perform a temperature conversion by address
|
|
bool requestTemperaturesByAddress(const uint8_t*);
|
|
|
|
// sends command for one device to perform a temperature conversion by index
|
|
bool requestTemperaturesByIndex(uint8_t);
|
|
|
|
// returns temperature raw value (12 bit integer of 1/128 degrees C)
|
|
int16_t getTemp(const uint8_t*);
|
|
|
|
// returns temperature in degrees C
|
|
float getTempC(const uint8_t*);
|
|
|
|
// returns temperature in degrees F
|
|
float getTempF(const uint8_t*);
|
|
|
|
// Get temperature for device index (slow)
|
|
float getTempCByIndex(uint8_t);
|
|
|
|
// Get temperature for device index (slow)
|
|
float getTempFByIndex(uint8_t);
|
|
|
|
// returns true if the bus requires parasite power
|
|
bool isParasitePowerMode(void);
|
|
|
|
// Is a conversion complete on the wire? Only applies to the first sensor on the wire.
|
|
bool isConversionComplete(void);
|
|
|
|
int16_t millisToWaitForConversion(uint8_t);
|
|
|
|
#if REQUIRESALARMS
|
|
|
|
typedef void AlarmHandler(const uint8_t*);
|
|
|
|
// sets the high alarm temperature for a device
|
|
// accepts a int8_t. valid range is -55C - 125C
|
|
void setHighAlarmTemp(const uint8_t*, int8_t);
|
|
|
|
// sets the low alarm temperature for a device
|
|
// accepts a int8_t. valid range is -55C - 125C
|
|
void setLowAlarmTemp(const uint8_t*, int8_t);
|
|
|
|
// returns a int8_t with the current high alarm temperature for a device
|
|
// in the range -55C - 125C
|
|
int8_t getHighAlarmTemp(const uint8_t*);
|
|
|
|
// returns a int8_t with the current low alarm temperature for a device
|
|
// in the range -55C - 125C
|
|
int8_t getLowAlarmTemp(const uint8_t*);
|
|
|
|
// resets internal variables used for the alarm search
|
|
void resetAlarmSearch(void);
|
|
|
|
// search the wire for devices with active alarms
|
|
bool alarmSearch(uint8_t*);
|
|
|
|
// returns true if ia specific device has an alarm
|
|
bool hasAlarm(const uint8_t*);
|
|
|
|
// returns true if any device is reporting an alarm on the bus
|
|
bool hasAlarm(void);
|
|
|
|
// runs the alarm handler for all devices returned by alarmSearch()
|
|
void processAlarms(void);
|
|
|
|
// sets the alarm handler
|
|
void setAlarmHandler(const AlarmHandler *);
|
|
|
|
// returns true if an AlarmHandler has been set
|
|
bool hasAlarmHandler();
|
|
|
|
#endif
|
|
|
|
// if no alarm handler is used the two bytes can be used as user data
|
|
// example of such usage is an ID.
|
|
// note if device is not connected it will fail writing the data.
|
|
// note if address cannot be found no error will be reported.
|
|
// in short use carefully
|
|
void setUserData(const uint8_t*, int16_t);
|
|
void setUserDataByIndex(uint8_t, int16_t);
|
|
int16_t getUserData(const uint8_t*);
|
|
int16_t getUserDataByIndex(uint8_t);
|
|
|
|
// convert from Celsius to Fahrenheit
|
|
static float toFahrenheit(float);
|
|
|
|
// convert from Fahrenheit to Celsius
|
|
static float toCelsius(float);
|
|
|
|
// convert from raw to Celsius
|
|
static float rawToCelsius(int16_t);
|
|
|
|
// convert from raw to Fahrenheit
|
|
static float rawToFahrenheit(int16_t);
|
|
|
|
#if REQUIRESNEW
|
|
|
|
// initialize memory area
|
|
void* operator new (unsigned int);
|
|
|
|
// delete memory reference
|
|
void operator delete(void*);
|
|
|
|
#endif
|
|
|
|
private:
|
|
typedef uint8_t ScratchPad[9];
|
|
|
|
// parasite power on or off
|
|
bool parasite;
|
|
|
|
// used to determine the delay amount needed to allow for the
|
|
// temperature conversion to take place
|
|
uint8_t bitResolution;
|
|
|
|
// used to requestTemperature with or without delay
|
|
bool waitForConversion;
|
|
|
|
// used to requestTemperature to dynamically check if a conversion is complete
|
|
bool checkForConversion;
|
|
|
|
// count of devices on the bus
|
|
uint8_t devices;
|
|
|
|
// count of DS18xxx Family devices on bus
|
|
uint8_t ds18Count;
|
|
|
|
// Take a pointer to one wire instance
|
|
OneWire* _wire;
|
|
|
|
// reads scratchpad and returns the raw temperature
|
|
int16_t calculateTemperature(const uint8_t*, uint8_t*);
|
|
|
|
void blockTillConversionComplete(uint8_t);
|
|
|
|
#if REQUIRESALARMS
|
|
|
|
// required for alarmSearch
|
|
uint8_t alarmSearchAddress[8];
|
|
int8_t alarmSearchJunction;
|
|
uint8_t alarmSearchExhausted;
|
|
|
|
// the alarm handler function pointer
|
|
AlarmHandler *_AlarmHandler;
|
|
|
|
#endif
|
|
|
|
};
|
|
#endif
|