st-anything/lib/WiFi101/CHANGELOG
Gašper Dobrovoljc ec125f27db
IP Configuration
2023-03-11 15:11:03 +01:00

156 lines
6.0 KiB
Plaintext

WiFi101 ?.?.? - ????.??.??
WiFi101 0.16.0 - 2018.04.04
* Added WiFi.setTimeout(timeout) API to set timeout of WiFi.begin(...)
* Changed check firmware version comparision from == to >=
* Updated latest firmware version for model B to 19.6.1
WiFi101 0.15.3 - 2018.11.21
* Fixed unreachable destination issue in UDP packet transmission
* Changed where required, in library's examples, the server's URL arduino.cc\80 in example.org\80, because http://arduino.cc will be no longer available
* Changed the MAC address print in the library's example now are showed corectly all the MAC address chars
* Fixed WiFiUDP::endPacket() return value in accord with sendig returns. Thanks to @mjlitke @jrowberg
* Changed WiFiSocketClass::create(...) return condition. Thanks to @jrowberg
* Changed server and URL to avoid 301 response from Server
* Fixed initialization Server issue by adding socket initialization in WiFiServer::WiFiServer constructor
WiFi101 0.15.2 - 2018.02.20
* Fixed issue with WiFiServer::begin() stopping first listening server
WiFi101 0.15.1 - 2018.02.14
* Fixed compatibility with Arduino Due
* Fixed return code of WiFiUdp::endPacket(). Thanks @mlitke
* Fixed WiFiServer::available() hanging after WiFi.end() is called
WiFi101 0.15.0 - 2018.01.02
* Fixed WiFi.status() hanging if no shield was present
* Reworked socket buffer layer to prevent (SAMD) and reduce lockups (AVR)
* Make reset pin optional. Thanks @awatterott
* Added ability to retrieve remote IP and port of WiFiClient
WiFi101 0.14.3 - 2017.06.01
* Fixed issues with WiFiMDNSResponder and large request packets
* Fixed issues with WiFiClient and sending data after the socket is closed
WiFi101 0.14.2 - 2017.05.08
* Fixed issues with WiFiServer::write not working
WiFi101 0.14.1 - 2017.04.20
* Fixed issues with WiFiMDNSResponder and Windows using Bonjour
* Correct cast of buffer size when processing received data
WiFi101 0.14.0 - 2017.03.22
* Added support for firmware 19.5.2
* Add ability to create Access Point with WPA security (f/w 19.5.2 or higher)
* Add WiFi.hostname(name) method to set custom host name for DHCP (f/w 19.5.2 or higher)
* Enables support for AES-256 Ciphers (f/w 19.5.2 or higher)
* Make provisioning mode backwards compatible with f/w 19.4.4 and older
WiFi101 0.13.0 - 2017.03.01
* Added WiFi.channel() and WiFi.BSSID()
WiFi101 0.12.1 - 2017.01.19
* Fixed tomorrow day issue in WiFi.getTime()
WiFi101 0.12.0 - 2017.01.05
* Made provisioning mode easier and added example sketch
* Fixed WiFi.getTime() not returning 0, if time has not been synced via NTP
* Fixed crashing when connecting after scanning
* Fixed WiFiServer::available() returning valid client on outbound client connection
* Added WiFiUdp::beginMulticast(port) function for compatiblity with EthernetUdp, as beginMulti was inconsistent
WiFi101 0.11.2 - 2016.12.15
* Fixed value of WiFi.getTime() being off by one day
* Fixed calling WiFi.RSSI() causing lockups
WiFi101 0.11.1 - 2016.11.29
* Fixed regression for non-AVR boards that resulted in corrupt with data over than 1400 bytes was received
WiFi101 0.11.0 - 2016.11.14
* Changed WiFi.ping(...) to return round trip time on success, negative value on error. Thanks @PKGeorgiev
* WiFi.end() now powers down the WiFi module
* WiFi.config(ip) can now be used to set a static IP for WiFi.begin(...)
* Fixed WiFi.BSSID(bssid) returning reversed MAC address
* Added WiFi.APClientMacAddress() API to get MAC address of AP client in AP mode
* Added WiFi.getTime() API to get epoch from NTP
WiFi101 0.10.0 - 2016.09.08
* Added WiFi.end() to disconnect from the AP or end AP mode
* Added new WiFi.ping(...) functionality. Thanks @PKGeorgiev
* Added WiFi.setPins(...) to customize the CS, INTN, RESET and CHIPEN pins
* Add new WL_AP_LISTENING, WL_AP_CONNECTED, and WL_AP_FAILED status types for AP mode
* Fixed return value of WiFiUDP::beginPacket(host, port) when host is successfully resolved
* Added power management methods: WiFi.lowPowerMode(), WiFi.maxLowPowerMode(), WiFi.noLowPowerMode()
* Close TCP sockets when physical link is disconnected
* Fixed WiFi.RSSI() returning 0 when there was pending socket data
WiFi101 0.9.1 - 2016.04.19
* Increased compatibility with 3rd party boards and architectures.
* Rename WiFiMdnsResponder.h/cpp to WiFiMDNSResponder.h/cpp
* Fixed buffering of UDP packet
WiFi101 0.9.0 - 2016.03.21
* Fixed WiFi.status() hanging when shield is not present
* Fixed MAC address returning 00:00:00:00:00:00 with firmware version 19.3.0
* Fixed SSL write functionality with firmware version 19.3.0
* Fixed previous version of the library not working on the Uno and other boards that used PCINT's
* Added beginAP(...) API's to create access point with WEP passwords
* Fixed beginAP(...) channel off by one error
* Fixed WiFi.status() always returning WL_CONNECTED once connected, even if access point is disconnected later
* Added beginMulti API for Multicast UDP support
* Added WiFiMDNSResponder class and MDNS Web server example
WiFi101 0.8.0 - 2016.02.15
* Added example for Access Point web server (thanks @ladyada)
* Fixed MAC Address printed in reverse order
* Allow another library to override PCINT ISR (fix issues when using the WiFi101
library with other libraries like SoftwareSerial)
WiFi101 0.7.0 - 2015.01.11
* Added support for WiFi Firmware 19.4.4
* WiFi.hostByName(...) will not try resolve the domain name if it's already a numeric IP
* Fixed manual IP configuration (no DHCP)
* Fixed WiFiServer.available(), now follows API specification
* Fixed WEP key connection
* Fixed WiFiClient copy constructor and assignment operator. This improves stability when
Client objects are assigned or returned from functions.
* Control pins are now configurable through defines from variant.
WiFi101 0.6.0 - 2015.11.27
* Fixed bug with AVR boards when Web Server is used
* Fixed UDP read bug on AVR Boards
* Added missing inlcude for SSL Client
* Fixed peek() function
* Fixed some examples
WiFi101 0.5.1 - 2015.10.06
* Improved support for AVR Boards (Uno, Mega, Leonardo, etc.) and
ARM based boards (Due and Zero).
WiFi101 0.5.0 - 2015.10.01
* Initial release