st-anything/lib/Adafruit MPR121/Adafruit_MPR121.h
Gašper Dobrovoljc ec125f27db
IP Configuration
2023-03-11 15:11:03 +01:00

120 lines
3.2 KiB
C++

/*!
* @file Adafruit_MPR121.h
*
* This is a library for the MPR121 12-Channel Capacitive Sensor
*
* Designed specifically to work with the MPR121 board.
*
* Pick one up today in the adafruit shop!
* ------> https://www.adafruit.com/product/1982
*
* These sensors use I2C to communicate, 2+ pins are required to interface
*
* Adafruit invests time and resources providing this open source code,
* please support Adafruit andopen-source hardware by purchasing products
* from Adafruit!
*
* Limor Fried/Ladyada (Adafruit Industries).
*
* BSD license, all text above must be included in any redistribution
*/
#ifndef ADAFRUIT_MPR121_H
#define ADAFRUIT_MPR121_H
#include "Arduino.h"
#include <Adafruit_BusIO_Register.h>
#include <Adafruit_I2CDevice.h>
// The default I2C address
#define MPR121_I2CADDR_DEFAULT 0x5A ///< default I2C address
#define MPR121_TOUCH_THRESHOLD_DEFAULT 12 ///< default touch threshold value
#define MPR121_RELEASE_THRESHOLD_DEFAULT 6 ///< default relese threshold value
/*!
* Device register map
*/
enum {
MPR121_TOUCHSTATUS_L = 0x00,
MPR121_TOUCHSTATUS_H = 0x01,
MPR121_STATUS_L = 0x02,
MPR121_STATUS_H = 0x03,
MPR121_FILTDATA_0L = 0x04,
MPR121_FILTDATA_0H = 0x05,
MPR121_BASELINE_0 = 0x1E,
MPR121_MHDR = 0x2B,
MPR121_NHDR = 0x2C,
MPR121_NCLR = 0x2D,
MPR121_FDLR = 0x2E,
MPR121_MHDF = 0x2F,
MPR121_NHDF = 0x30,
MPR121_NCLF = 0x31,
MPR121_FDLF = 0x32,
MPR121_NHDT = 0x33,
MPR121_NCLT = 0x34,
MPR121_FDLT = 0x35,
MPR121_TOUCHTH_0 = 0x41,
MPR121_RELEASETH_0 = 0x42,
MPR121_DEBOUNCE = 0x5B,
MPR121_CONFIG1 = 0x5C,
MPR121_CONFIG2 = 0x5D,
MPR121_CHARGECURR_0 = 0x5F,
MPR121_CHARGETIME_1 = 0x6C,
MPR121_ECR = 0x5E,
MPR121_AUTOCONFIG0 = 0x7B,
MPR121_AUTOCONFIG1 = 0x7C,
MPR121_UPLIMIT = 0x7D,
MPR121_LOWLIMIT = 0x7E,
MPR121_TARGETLIMIT = 0x7F,
MPR121_GPIODIR = 0x76,
MPR121_GPIOEN = 0x77,
MPR121_GPIOSET = 0x78,
MPR121_GPIOCLR = 0x79,
MPR121_GPIOTOGGLE = 0x7A,
MPR121_SOFTRESET = 0x80,
};
//.. thru to 0x1C/0x1D
/*!
* @brief Class that stores state and functions for interacting with MPR121
* proximity capacitive touch sensor controller.
*/
class Adafruit_MPR121 {
public:
// Hardware I2C
Adafruit_MPR121();
bool begin(uint8_t sensibility5C, uint8_t sensibility5D,
uint8_t i2caddr = MPR121_I2CADDR_DEFAULT,
TwoWire *theWire = &Wire,
uint8_t touchThreshold = MPR121_TOUCH_THRESHOLD_DEFAULT,
uint8_t releaseThreshold = MPR121_RELEASE_THRESHOLD_DEFAULT);
uint16_t filteredData(uint8_t t);
uint16_t baselineData(uint8_t t);
uint8_t readRegister8(uint8_t reg);
uint16_t readRegister16(uint8_t reg);
void writeRegister(uint8_t reg, uint8_t value);
uint16_t touched(void);
// Add deprecated attribute so that the compiler shows a warning
void setThreshholds(uint8_t touch, uint8_t release)
__attribute__((deprecated));
void setThresholds(uint8_t touch, uint8_t release);
// Function that checks if any of the sensors went our of rance
bool wentOutOfRange();
// Function that checks if any of the sensors had an overcurrent
bool hadOverCurrent(uid_t touched);
private:
Adafruit_I2CDevice *i2c_dev = NULL;
};
#endif