111 lines
2.9 KiB
C++
111 lines
2.9 KiB
C++
/*
|
|
This example connects to a WPA2 Enterprise WiFi network.
|
|
Then it prints the MAC address of the WiFi module,
|
|
the IP address obtained, and other network details.
|
|
|
|
Based on ConnectWithWPA.ino by dlf (Metodo2 srl) and Tom Igoe
|
|
*/
|
|
#include <SPI.h>
|
|
#include <WiFiNINA.h>
|
|
|
|
#include "arduino_secrets.h"
|
|
///////please enter your sensitive data in the Secret tab/arduino_secrets.h
|
|
char ssid[] = SECRET_SSID; // your WPA2 enterprise network SSID (name)
|
|
char user[] = SECRET_USER; // your WPA2 enterprise username
|
|
char pass[] = SECRET_PASS; // your WPA2 enterprise password
|
|
int status = WL_IDLE_STATUS; // the WiFi radio's status
|
|
|
|
void setup() {
|
|
//Initialize serial and wait for port to open:
|
|
Serial.begin(9600);
|
|
while (!Serial) {
|
|
; // wait for serial port to connect. Needed for native USB port only
|
|
}
|
|
|
|
// check for the WiFi module:
|
|
if (WiFi.status() == WL_NO_MODULE) {
|
|
Serial.println("Communication with WiFi module failed!");
|
|
// don't continue
|
|
while (true);
|
|
}
|
|
|
|
String fv = WiFi.firmwareVersion();
|
|
if (fv < WIFI_FIRMWARE_LATEST_VERSION) {
|
|
Serial.println("Please upgrade the firmware");
|
|
}
|
|
|
|
// attempt to connect to WiFi network:
|
|
while (status != WL_CONNECTED) {
|
|
Serial.print("Attempting to connect to WPA SSID: ");
|
|
Serial.println(ssid);
|
|
// Connect to WPA2 enterprise network:
|
|
// - You can optionally provide additional identity and CA cert (string) parameters if your network requires them:
|
|
// WiFi.beginEnterprise(ssid, user, pass, identity, caCert)
|
|
status = WiFi.beginEnterprise(ssid, user, pass);
|
|
|
|
// wait 10 seconds for connection:
|
|
delay(10000);
|
|
}
|
|
|
|
// you're connected now, so print out the data:
|
|
Serial.print("You're connected to the network");
|
|
printCurrentNet();
|
|
printWifiData();
|
|
|
|
}
|
|
|
|
void loop() {
|
|
// check the network connection once every 10 seconds:
|
|
delay(10000);
|
|
printCurrentNet();
|
|
}
|
|
|
|
void printWifiData() {
|
|
// print your board's IP address:
|
|
IPAddress ip = WiFi.localIP();
|
|
Serial.print("IP Address: ");
|
|
Serial.println(ip);
|
|
|
|
// print your MAC address:
|
|
byte mac[6];
|
|
WiFi.macAddress(mac);
|
|
Serial.print("MAC address: ");
|
|
printMacAddress(mac);
|
|
}
|
|
|
|
void printCurrentNet() {
|
|
// print the SSID of the network you're attached to:
|
|
Serial.print("SSID: ");
|
|
Serial.println(WiFi.SSID());
|
|
|
|
// print the MAC address of the router you're attached to:
|
|
byte bssid[6];
|
|
WiFi.BSSID(bssid);
|
|
Serial.print("BSSID: ");
|
|
printMacAddress(bssid);
|
|
|
|
// print the received signal strength:
|
|
long rssi = WiFi.RSSI();
|
|
Serial.print("signal strength (RSSI):");
|
|
Serial.println(rssi);
|
|
|
|
// print the encryption type:
|
|
byte encryption = WiFi.encryptionType();
|
|
Serial.print("Encryption Type:");
|
|
Serial.println(encryption, HEX);
|
|
Serial.println();
|
|
}
|
|
|
|
void printMacAddress(byte mac[]) {
|
|
for (int i = 5; i >= 0; i--) {
|
|
if (mac[i] < 16) {
|
|
Serial.print("0");
|
|
}
|
|
Serial.print(mac[i], HEX);
|
|
if (i > 0) {
|
|
Serial.print(":");
|
|
}
|
|
}
|
|
Serial.println();
|
|
}
|