WiFi101 ?.?.? - ????.??.?? WiFi101 0.16.0 - 2018.04.04 * Added WiFi.setTimeout(timeout) API to set timeout of WiFi.begin(...) * Changed check firmware version comparision from == to >= * Updated latest firmware version for model B to 19.6.1 WiFi101 0.15.3 - 2018.11.21 * Fixed unreachable destination issue in UDP packet transmission * Changed where required, in library's examples, the server's URL arduino.cc\80 in example.org\80, because http://arduino.cc will be no longer available * Changed the MAC address print in the library's example now are showed corectly all the MAC address chars * Fixed WiFiUDP::endPacket() return value in accord with sendig returns. Thanks to @mjlitke @jrowberg * Changed WiFiSocketClass::create(...) return condition. Thanks to @jrowberg * Changed server and URL to avoid 301 response from Server * Fixed initialization Server issue by adding socket initialization in WiFiServer::WiFiServer constructor WiFi101 0.15.2 - 2018.02.20 * Fixed issue with WiFiServer::begin() stopping first listening server WiFi101 0.15.1 - 2018.02.14 * Fixed compatibility with Arduino Due * Fixed return code of WiFiUdp::endPacket(). Thanks @mlitke * Fixed WiFiServer::available() hanging after WiFi.end() is called WiFi101 0.15.0 - 2018.01.02 * Fixed WiFi.status() hanging if no shield was present * Reworked socket buffer layer to prevent (SAMD) and reduce lockups (AVR) * Make reset pin optional. Thanks @awatterott * Added ability to retrieve remote IP and port of WiFiClient WiFi101 0.14.3 - 2017.06.01 * Fixed issues with WiFiMDNSResponder and large request packets * Fixed issues with WiFiClient and sending data after the socket is closed WiFi101 0.14.2 - 2017.05.08 * Fixed issues with WiFiServer::write not working WiFi101 0.14.1 - 2017.04.20 * Fixed issues with WiFiMDNSResponder and Windows using Bonjour * Correct cast of buffer size when processing received data WiFi101 0.14.0 - 2017.03.22 * Added support for firmware 19.5.2 * Add ability to create Access Point with WPA security (f/w 19.5.2 or higher) * Add WiFi.hostname(name) method to set custom host name for DHCP (f/w 19.5.2 or higher) * Enables support for AES-256 Ciphers (f/w 19.5.2 or higher) * Make provisioning mode backwards compatible with f/w 19.4.4 and older WiFi101 0.13.0 - 2017.03.01 * Added WiFi.channel() and WiFi.BSSID() WiFi101 0.12.1 - 2017.01.19 * Fixed tomorrow day issue in WiFi.getTime() WiFi101 0.12.0 - 2017.01.05 * Made provisioning mode easier and added example sketch * Fixed WiFi.getTime() not returning 0, if time has not been synced via NTP * Fixed crashing when connecting after scanning * Fixed WiFiServer::available() returning valid client on outbound client connection * Added WiFiUdp::beginMulticast(port) function for compatiblity with EthernetUdp, as beginMulti was inconsistent WiFi101 0.11.2 - 2016.12.15 * Fixed value of WiFi.getTime() being off by one day * Fixed calling WiFi.RSSI() causing lockups WiFi101 0.11.1 - 2016.11.29 * Fixed regression for non-AVR boards that resulted in corrupt with data over than 1400 bytes was received WiFi101 0.11.0 - 2016.11.14 * Changed WiFi.ping(...) to return round trip time on success, negative value on error. Thanks @PKGeorgiev * WiFi.end() now powers down the WiFi module * WiFi.config(ip) can now be used to set a static IP for WiFi.begin(...) * Fixed WiFi.BSSID(bssid) returning reversed MAC address * Added WiFi.APClientMacAddress() API to get MAC address of AP client in AP mode * Added WiFi.getTime() API to get epoch from NTP WiFi101 0.10.0 - 2016.09.08 * Added WiFi.end() to disconnect from the AP or end AP mode * Added new WiFi.ping(...) functionality. Thanks @PKGeorgiev * Added WiFi.setPins(...) to customize the CS, INTN, RESET and CHIPEN pins * Add new WL_AP_LISTENING, WL_AP_CONNECTED, and WL_AP_FAILED status types for AP mode * Fixed return value of WiFiUDP::beginPacket(host, port) when host is successfully resolved * Added power management methods: WiFi.lowPowerMode(), WiFi.maxLowPowerMode(), WiFi.noLowPowerMode() * Close TCP sockets when physical link is disconnected * Fixed WiFi.RSSI() returning 0 when there was pending socket data WiFi101 0.9.1 - 2016.04.19 * Increased compatibility with 3rd party boards and architectures. * Rename WiFiMdnsResponder.h/cpp to WiFiMDNSResponder.h/cpp * Fixed buffering of UDP packet WiFi101 0.9.0 - 2016.03.21 * Fixed WiFi.status() hanging when shield is not present * Fixed MAC address returning 00:00:00:00:00:00 with firmware version 19.3.0 * Fixed SSL write functionality with firmware version 19.3.0 * Fixed previous version of the library not working on the Uno and other boards that used PCINT's * Added beginAP(...) API's to create access point with WEP passwords * Fixed beginAP(...) channel off by one error * Fixed WiFi.status() always returning WL_CONNECTED once connected, even if access point is disconnected later * Added beginMulti API for Multicast UDP support * Added WiFiMDNSResponder class and MDNS Web server example WiFi101 0.8.0 - 2016.02.15 * Added example for Access Point web server (thanks @ladyada) * Fixed MAC Address printed in reverse order * Allow another library to override PCINT ISR (fix issues when using the WiFi101 library with other libraries like SoftwareSerial) WiFi101 0.7.0 - 2015.01.11 * Added support for WiFi Firmware 19.4.4 * WiFi.hostByName(...) will not try resolve the domain name if it's already a numeric IP * Fixed manual IP configuration (no DHCP) * Fixed WiFiServer.available(), now follows API specification * Fixed WEP key connection * Fixed WiFiClient copy constructor and assignment operator. This improves stability when Client objects are assigned or returned from functions. * Control pins are now configurable through defines from variant. WiFi101 0.6.0 - 2015.11.27 * Fixed bug with AVR boards when Web Server is used * Fixed UDP read bug on AVR Boards * Added missing inlcude for SSL Client * Fixed peek() function * Fixed some examples WiFi101 0.5.1 - 2015.10.06 * Improved support for AVR Boards (Uno, Mega, Leonardo, etc.) and ARM based boards (Due and Zero). WiFi101 0.5.0 - 2015.10.01 * Initial release