/*! * @file Adafruit_TSL2561_U.h * * This is part of Adafruit's FXOS8700 driver for the Arduino platform. It is * designed specifically to work with the Adafruit FXOS8700 breakout: * https://www.adafruit.com/products/3463 * * These sensors use I2C to communicate, 2 pins (SCL+SDA) are required * to interface with the breakout. * * Adafruit invests time and resources providing this open source code, * please support Adafruit and open-source hardware by purchasing * products from Adafruit! * * Written by Kevin "KTOWN" Townsend for Adafruit Industries. * * BSD license, all text here must be included in any redistribution. * */ #ifndef ADAFRUIT_TSL2561_H_ #define ADAFRUIT_TSL2561_H_ #include #include #include #define TSL2561_VISIBLE 2 ///< channel 0 - channel 1 #define TSL2561_INFRARED 1 ///< channel 1 #define TSL2561_FULLSPECTRUM 0 ///< channel 0 // I2C address options #define TSL2561_ADDR_LOW (0x29) ///< Default address (pin pulled low) #define TSL2561_ADDR_FLOAT (0x39) ///< Default address (pin left floating) #define TSL2561_ADDR_HIGH (0x49) ///< Default address (pin pulled high) // Lux calculations differ slightly for CS package //#define TSL2561_PACKAGE_CS ///< Chip scale package #define TSL2561_PACKAGE_T_FN_CL ///< Dual Flat No-Lead package #define TSL2561_COMMAND_BIT (0x80) ///< Must be 1 #define TSL2561_CLEAR_BIT (0x40) ///< Clears any pending interrupt (write 1 to clear) #define TSL2561_WORD_BIT (0x20) ///< 1 = read/write word (rather than byte) #define TSL2561_BLOCK_BIT (0x10) ///< 1 = using block read/write #define TSL2561_CONTROL_POWERON (0x03) ///< Control register setting to turn on #define TSL2561_CONTROL_POWEROFF (0x00) ///< Control register setting to turn off #define TSL2561_LUX_LUXSCALE (14) ///< Scale by 2^14 #define TSL2561_LUX_RATIOSCALE (9) ///< Scale ratio by 2^9 #define TSL2561_LUX_CHSCALE (10) ///< Scale channel values by 2^10 #define TSL2561_LUX_CHSCALE_TINT0 (0x7517) ///< 322/11 * 2^TSL2561_LUX_CHSCALE #define TSL2561_LUX_CHSCALE_TINT1 (0x0FE7) ///< 322/81 * 2^TSL2561_LUX_CHSCALE // T, FN and CL package values #define TSL2561_LUX_K1T (0x0040) ///< 0.125 * 2^RATIO_SCALE #define TSL2561_LUX_B1T (0x01f2) ///< 0.0304 * 2^LUX_SCALE #define TSL2561_LUX_M1T (0x01be) ///< 0.0272 * 2^LUX_SCALE #define TSL2561_LUX_K2T (0x0080) ///< 0.250 * 2^RATIO_SCALE #define TSL2561_LUX_B2T (0x0214) ///< 0.0325 * 2^LUX_SCALE #define TSL2561_LUX_M2T (0x02d1) ///< 0.0440 * 2^LUX_SCALE #define TSL2561_LUX_K3T (0x00c0) ///< 0.375 * 2^RATIO_SCALE #define TSL2561_LUX_B3T (0x023f) ///< 0.0351 * 2^LUX_SCALE #define TSL2561_LUX_M3T (0x037b) ///< 0.0544 * 2^LUX_SCALE #define TSL2561_LUX_K4T (0x0100) ///< 0.50 * 2^RATIO_SCALE #define TSL2561_LUX_B4T (0x0270) ///< 0.0381 * 2^LUX_SCALE #define TSL2561_LUX_M4T (0x03fe) ///< 0.0624 * 2^LUX_SCALE #define TSL2561_LUX_K5T (0x0138) ///< 0.61 * 2^RATIO_SCALE #define TSL2561_LUX_B5T (0x016f) ///< 0.0224 * 2^LUX_SCALE #define TSL2561_LUX_M5T (0x01fc) ///< 0.0310 * 2^LUX_SCALE #define TSL2561_LUX_K6T (0x019a) ///< 0.80 * 2^RATIO_SCALE #define TSL2561_LUX_B6T (0x00d2) ///< 0.0128 * 2^LUX_SCALE #define TSL2561_LUX_M6T (0x00fb) ///< 0.0153 * 2^LUX_SCALE #define TSL2561_LUX_K7T (0x029a) ///< 1.3 * 2^RATIO_SCALE #define TSL2561_LUX_B7T (0x0018) ///< 0.00146 * 2^LUX_SCALE #define TSL2561_LUX_M7T (0x0012) ///< 0.00112 * 2^LUX_SCALE #define TSL2561_LUX_K8T (0x029a) ///< 1.3 * 2^RATIO_SCALE #define TSL2561_LUX_B8T (0x0000) ///< 0.000 * 2^LUX_SCALE #define TSL2561_LUX_M8T (0x0000) ///< 0.000 * 2^LUX_SCALE // CS package values #define TSL2561_LUX_K1C (0x0043) ///< 0.130 * 2^RATIO_SCALE #define TSL2561_LUX_B1C (0x0204) ///< 0.0315 * 2^LUX_SCALE #define TSL2561_LUX_M1C (0x01ad) ///< 0.0262 * 2^LUX_SCALE #define TSL2561_LUX_K2C (0x0085) ///< 0.260 * 2^RATIO_SCALE #define TSL2561_LUX_B2C (0x0228) ///< 0.0337 * 2^LUX_SCALE #define TSL2561_LUX_M2C (0x02c1) ///< 0.0430 * 2^LUX_SCALE #define TSL2561_LUX_K3C (0x00c8) ///< 0.390 * 2^RATIO_SCALE #define TSL2561_LUX_B3C (0x0253) ///< 0.0363 * 2^LUX_SCALE #define TSL2561_LUX_M3C (0x0363) ///< 0.0529 * 2^LUX_SCALE #define TSL2561_LUX_K4C (0x010a) ///< 0.520 * 2^RATIO_SCALE #define TSL2561_LUX_B4C (0x0282) ///< 0.0392 * 2^LUX_SCALE #define TSL2561_LUX_M4C (0x03df) ///< 0.0605 * 2^LUX_SCALE #define TSL2561_LUX_K5C (0x014d) ///< 0.65 * 2^RATIO_SCALE #define TSL2561_LUX_B5C (0x0177) ///< 0.0229 * 2^LUX_SCALE #define TSL2561_LUX_M5C (0x01dd) ///< 0.0291 * 2^LUX_SCALE #define TSL2561_LUX_K6C (0x019a) ///< 0.80 * 2^RATIO_SCALE #define TSL2561_LUX_B6C (0x0101) ///< 0.0157 * 2^LUX_SCALE #define TSL2561_LUX_M6C (0x0127) ///< 0.0180 * 2^LUX_SCALE #define TSL2561_LUX_K7C (0x029a) ///< 1.3 * 2^RATIO_SCALE #define TSL2561_LUX_B7C (0x0037) ///< 0.00338 * 2^LUX_SCALE #define TSL2561_LUX_M7C (0x002b) ///< 0.00260 * 2^LUX_SCALE #define TSL2561_LUX_K8C (0x029a) ///< 1.3 * 2^RATIO_SCALE #define TSL2561_LUX_B8C (0x0000) ///< 0.000 * 2^LUX_SCALE #define TSL2561_LUX_M8C (0x0000) ///< 0.000 * 2^LUX_SCALE // Auto-gain thresholds #define TSL2561_AGC_THI_13MS (4850) ///< Max value at Ti 13ms = 5047 #define TSL2561_AGC_TLO_13MS (100) ///< Min value at Ti 13ms = 100 #define TSL2561_AGC_THI_101MS (36000) ///< Max value at Ti 101ms = 37177 #define TSL2561_AGC_TLO_101MS (200) ///< Min value at Ti 101ms = 200 #define TSL2561_AGC_THI_402MS (63000) ///< Max value at Ti 402ms = 65535 #define TSL2561_AGC_TLO_402MS (500) ///< Min value at Ti 402ms = 500 // Clipping thresholds #define TSL2561_CLIPPING_13MS (4900) ///< # Counts that trigger a change in gain/integration #define TSL2561_CLIPPING_101MS (37000) ///< # Counts that trigger a change in gain/integration #define TSL2561_CLIPPING_402MS (65000) ///< # Counts that trigger a change in gain/integration // Delay for integration times #define TSL2561_DELAY_INTTIME_13MS (15) ///< Wait 15ms for 13ms integration #define TSL2561_DELAY_INTTIME_101MS (120) ///< Wait 120ms for 101ms integration #define TSL2561_DELAY_INTTIME_402MS (450) ///< Wait 450ms for 402ms integration /** TSL2561 I2C Registers */ enum { TSL2561_REGISTER_CONTROL = 0x00, // Control/power register TSL2561_REGISTER_TIMING = 0x01, // Set integration time register TSL2561_REGISTER_THRESHHOLDL_LOW = 0x02, // Interrupt low threshold low-byte TSL2561_REGISTER_THRESHHOLDL_HIGH = 0x03, // Interrupt low threshold high-byte TSL2561_REGISTER_THRESHHOLDH_LOW = 0x04, // Interrupt high threshold low-byte TSL2561_REGISTER_THRESHHOLDH_HIGH = 0x05, // Interrupt high threshold high-byte TSL2561_REGISTER_INTERRUPT = 0x06, // Interrupt settings TSL2561_REGISTER_CRC = 0x08, // Factory use only TSL2561_REGISTER_ID = 0x0A, // TSL2561 identification setting TSL2561_REGISTER_CHAN0_LOW = 0x0C, // Light data channel 0, low byte TSL2561_REGISTER_CHAN0_HIGH = 0x0D, // Light data channel 0, high byte TSL2561_REGISTER_CHAN1_LOW = 0x0E, // Light data channel 1, low byte TSL2561_REGISTER_CHAN1_HIGH = 0x0F // Light data channel 1, high byte }; /** Three options for how long to integrate readings for */ typedef enum { TSL2561_INTEGRATIONTIME_13MS = 0x00, // 13.7ms TSL2561_INTEGRATIONTIME_101MS = 0x01, // 101ms TSL2561_INTEGRATIONTIME_402MS = 0x02 // 402ms } tsl2561IntegrationTime_t; /** TSL2561 offers 2 gain settings */ typedef enum { TSL2561_GAIN_1X = 0x00, // No gain TSL2561_GAIN_16X = 0x10, // 16x gain } tsl2561Gain_t; /**************************************************************************/ /*! @brief Class that stores state and functions for interacting with TSL2561 Light Sensor */ /**************************************************************************/ class Adafruit_TSL2561_Unified : public Adafruit_Sensor { public: Adafruit_TSL2561_Unified(uint8_t addr, int32_t sensorID = -1); boolean begin(void); boolean begin(TwoWire *theWire); boolean init(); /* TSL2561 Functions */ void enableAutoRange(bool enable); void setIntegrationTime(tsl2561IntegrationTime_t time); void setGain(tsl2561Gain_t gain); void getLuminosity (uint16_t *broadband, uint16_t *ir); uint32_t calculateLux(uint16_t broadband, uint16_t ir); /* Unified Sensor API Functions */ bool getEvent(sensors_event_t*); void getSensor(sensor_t*); private: TwoWire *_i2c; int8_t _addr; boolean _tsl2561Initialised; boolean _tsl2561AutoGain; tsl2561IntegrationTime_t _tsl2561IntegrationTime; tsl2561Gain_t _tsl2561Gain; int32_t _tsl2561SensorID; void enable (void); void disable (void); void write8 (uint8_t reg, uint8_t value); uint8_t read8 (uint8_t reg); uint16_t read16 (uint8_t reg); void getData (uint16_t *broadband, uint16_t *ir); }; #endif // ADAFRUIT_TSL2561_H