IP Configuration

lib/WiFiNINA/examples/WiFiPing/WiFiPing.ino

@@ -0,0 +1,135 @@
+/*
+  This example connects to an encrypted WiFi network (WPA/WPA2).
+  Then it prints the MAC address of the board,
+  the IP address obtained, and other network details.
+  Then it continuously pings given host specified by IP Address or name.
+
+  Circuit:
+  * Board with NINA module (Arduino MKR WiFi 1010, MKR VIDOR 4000 and UNO WiFi Rev.2)
+
+  created 13 July 2010
+  by dlf (Metodo2 srl)
+  modified 09 June 2016
+  by Petar Georgiev
+*/
+#include <SPI.h>
+#include <WiFiNINA.h>
+
+#include "arduino_secrets.h" 
+///////please enter your sensitive data in the Secret tab/arduino_secrets.h
+char ssid[] = SECRET_SSID;        // your network SSID (name)
+char pass[] = SECRET_PASS;    // your network password (use for WPA, or use as key for WEP)
+int status = WL_IDLE_STATUS;     // the WiFi radio's status
+
+// Specify IP address or hostname
+String hostName = "www.google.com";
+int pingResult;
+
+void setup() {
+  // Initialize serial and wait for port to open:
+  Serial.begin(9600);
+  while (!Serial) {
+    ; // wait for serial port to connect. Needed for native USB port only
+  }
+
+  // check for the WiFi module:
+  if (WiFi.status() == WL_NO_MODULE) {
+    Serial.println("Communication with WiFi module failed!");
+    // don't continue
+    while (true);
+  }
+
+  String fv = WiFi.firmwareVersion();
+  if (fv < WIFI_FIRMWARE_LATEST_VERSION) {
+    Serial.println("Please upgrade the firmware");
+  }
+
+  // attempt to connect to WiFi network:
+  while ( status != WL_CONNECTED) {
+    Serial.print("Attempting to connect to WPA SSID: ");
+    Serial.println(ssid);
+    // Connect to WPA/WPA2 network:
+    status = WiFi.begin(ssid, pass);
+
+    // wait 5 seconds for connection:
+    delay(5000);
+  }
+
+  // you're connected now, so print out the data:
+  Serial.println("You're connected to the network");
+  printCurrentNet();
+  printWiFiData();
+}
+
+void loop() {
+  Serial.print("Pinging ");
+  Serial.print(hostName);
+  Serial.print(": ");
+
+  pingResult = WiFi.ping(hostName);
+
+  if (pingResult >= 0) {
+    Serial.print("SUCCESS! RTT = ");
+    Serial.print(pingResult);
+    Serial.println(" ms");
+  } else {
+    Serial.print("FAILED! Error code: ");
+    Serial.println(pingResult);
+  }
+
+  delay(5000);
+}
+
+void printWiFiData() {
+  // print your board's IP address:
+  IPAddress ip = WiFi.localIP();
+  Serial.print("IP address : ");
+  Serial.println(ip);
+
+  Serial.print("Subnet mask: ");
+  Serial.println((IPAddress)WiFi.subnetMask());
+
+  Serial.print("Gateway IP : ");
+  Serial.println((IPAddress)WiFi.gatewayIP());
+
+  // print your MAC address:
+  byte mac[6];
+  WiFi.macAddress(mac);
+  Serial.print("MAC address: ");
+  printMacAddress(mac);
+}
+
+void printCurrentNet() {
+  // print the SSID of the network you're attached to:
+  Serial.print("SSID: ");
+  Serial.println(WiFi.SSID());
+
+  // print the MAC address of the router you're attached to:
+  byte bssid[6];
+  WiFi.BSSID(bssid);
+  Serial.print("BSSID: ");
+  printMacAddress(bssid);
+  // print the received signal strength:
+  long rssi = WiFi.RSSI();
+  Serial.print("signal strength (RSSI): ");
+  Serial.println(rssi);
+
+  // print the encryption type:
+  byte encryption = WiFi.encryptionType();
+  Serial.print("Encryption Type: ");
+  Serial.println(encryption, HEX);
+  Serial.println();
+}
+
+void printMacAddress(byte mac[]) {
+  for (int i = 5; i >= 0; i--) {
+    if (mac[i] < 16) {
+      Serial.print("0");
+    }
+    Serial.print(mac[i], HEX);
+    if (i > 0) {
+      Serial.print(":");
+    }
+  }
+  Serial.println();
+}

lib/WiFiNINA/examples/WiFiPing/arduino_secrets.h

@@ -0,0 +1,2 @@
+#define SECRET_SSID ""
+#define SECRET_PASS ""