klemen-home/st-anything
1
0
Fork 0
Code Issues Pull Requests Packages Projects Releases Wiki Activity

IP Configuration

Browse Source
This commit is contained in:
Gašper Dobrovoljc
2023-03-11 15:11:03 +01:00
commit ec125f27db
662 changed files with 103738 additions and 0 deletions
Download Patch File Download Diff File Expand all files Collapse all files

147
lib/SmartThings/examples/SmartThings_On_Off_LED_ThingShield/SmartThings_On_Off_LED_ThingShield.ino Normal file
View File

@@ -0,0 +1,147 @@
//*****************************************************************************
/// @file
/// @brief
/// Arduino SmartThings ThingShield On/Off with LED Example
///
/// Revised by Dan Ogorchock on 2017-02-10 to work with new "SmartThings v2.0" Library
/// -Now supports automatic selectic of SoftwareSerial or HardwareSerial constructor
/// depending on the Arduino Model.
/// -If using an Arduino UNO R3, be sure to set the ThingShield switch to the D2/D3 position
/// -If using an Arduino Leonardo, be sure to set the ThingShield switch to the D0/D1 position
/// -If using an Arduino MEGA 2560, bbe sure to set the ThingShield switch to the D2/D3 position AND
/// connect jumper wires between pins 2 & 14 as well as between pins 3 & 15.
///
/// DO NOT USE PINS 0,1,2,3,6 for I/O in your sketch as pins 0,1,2,3 are used by the ThingShield
/// and USB communications to your computer. Pin 6 is reserved by the ThingShield.
///
/// @note UNO R3 Pins
/// ______________
/// | |
/// | SW[] |
/// |[]RST |
/// | AREF |--
/// | GND |--
/// | 13 |--X Onboard LED
/// | 12 |--
/// | 11 |--
/// --| 3.3V 10 |--
/// --| 5V 9 |--
/// --| GND 8 |--
/// --| GND |
/// --| Vin 7 |--
/// | 6 |--Reserved
/// --| A0 5 |--
/// --| A1 ( ) 4 |--
/// --| A2 3 |--X THING_RX
/// --| A3 ____ 2 |--X THING_TX
/// --| A4 | | 1 |--X THING_RX
/// --| A5 | | 0 |--X THING_RX
/// |____| |____|
/// |____|
///
//*****************************************************************************
#include <SmartThingsThingShield.h>
//*****************************************************************************
// Pin Definitions | | | | | | | | | | | | | | | | | | | | | | | | | | | | |
// V V V V V V V V V V V V V V V V V V V V V V V V V V V V V
//*****************************************************************************
#define PIN_LED 13
#define PIN_THING_RX 3
#define PIN_THING_TX 2
//*****************************************************************************
// Global Variables | | | | | | | | | | | | | | | | | | | | | | | | | | | | |
// V V V V V V V V V V V V V V V V V V V V V V V V V V V V V
//*****************************************************************************
SmartThingsCallout_t messageCallout; // call out function forward decalaration
#if defined(ARDUINO_AVR_UNO) || defined(ARDUINO_AVR_NANO) || defined(ARDUINO_AVR_MINI) //Arduino UNO, NANO, MINI
st::SmartThingsThingShield smartthing(PIN_THING_RX, PIN_THING_TX, messageCallout); //Use Software Serial constructor
#elif defined(ARDUINO_AVR_LEONARDO) //Arduino Leonardo
st::SmartThingsThingShield smartthing(&Serial1, messageCallout); //Use Hardware Serial constructor w/Serial1
#elif defined(ARDUINO_AVR_MEGA) || defined(ARDUINO_AVR_MEGA2560) //Arduino MEGA 1280 or 2560
st::SmartThingsThingShield smartthing(&Serial3, messageCallout); //Use Hardware Serial constructor w/Serial3
#else
//assume user is using an UNO for the unknown case
st::SmartThingsThingShield smartthing(PIN_THING_RX, PIN_THING_TX, messageCallout); //Use Software Serial constructor
#endif
bool isDebugEnabled; // enable or disable debug in this example
int stateLED; // state to track last set value of LED
//*****************************************************************************
// Local Functions | | | | | | | | | | | | | | | | | | | | | | | | | | | | | |
// V V V V V V V V V V V V V V V V V V V V V V V V V V V V V V
//*****************************************************************************
void on()
{
stateLED = 1; // save state as 1 (on)
digitalWrite(PIN_LED, HIGH); // turn LED on
smartthing.shieldSetLED(0, 0, 1);
smartthing.send("on"); // send message to cloud
}
//*****************************************************************************
void off()
{
stateLED = 0; // set state to 0 (off)
digitalWrite(PIN_LED, LOW); // turn LED off
smartthing.shieldSetLED(0, 0, 0);
smartthing.send("off"); // send message to cloud
}
//*****************************************************************************
// API Functions | | | | | | | | | | | | | | | | | | | | | | | | | | | | | |
// V V V V V V V V V V V V V V V V V V V V V V V V V V V V V V
//*****************************************************************************
void setup()
{
// setup default state of global variables
isDebugEnabled = true;
stateLED = 0; // matches state of hardware pin set below
// setup hardware pins
pinMode(PIN_LED, OUTPUT); // define PIN_LED as an output
digitalWrite(PIN_LED, LOW); // set value to LOW (off) to match stateLED=0
//Run the SmartThings init() routine to make sure the ThingShield is connected to the ST Hub
smartthing.init();
if (isDebugEnabled)
{ // setup debug serial port
Serial.begin(9600); // setup serial with a baud rate of 9600
Serial.println("setup.."); // print out 'setup..' on start
}
}
//*****************************************************************************
void loop()
{
// run smartthing logic
smartthing.run();
}
//*****************************************************************************
void messageCallout(String message)
{
// if debug is enabled print out the received message
if (isDebugEnabled)
{
Serial.print("Received message: '");
Serial.print(message);
Serial.println("' ");
}
// if message contents equals to 'on' then call on() function
// else if message contents equals to 'off' then call off() function
if (message.equals("on"))
{
on();
}
else if (message.equals("off"))
{
off();
}
}