IP Configuration

lib/Adafruit_SHT31/examples/SHT31test/SHT31test.ino

@@ -0,0 +1,48 @@
+/*************************************************** 
+  This is an example for the SHT31-D Humidity & Temp Sensor
+
+  Designed specifically to work with the SHT31-D sensor from Adafruit
+  ----> https://www.adafruit.com/products/2857
+
+  These sensors use I2C to communicate, 2 pins are required to  
+  interface
+ ****************************************************/
+ 
+#include <Arduino.h>
+#include <Wire.h>
+#include "Adafruit_SHT31.h"
+
+Adafruit_SHT31 sht31 = Adafruit_SHT31();
+
+void setup() {
+  Serial.begin(9600);
+
+  while (!Serial)
+    delay(10);     // will pause Zero, Leonardo, etc until serial console opens
+
+  Serial.println("SHT31 test");
+  if (! sht31.begin(0x44)) {   // Set to 0x45 for alternate i2c addr
+    Serial.println("Couldn't find SHT31");
+    while (1) delay(1);
+  }
+}
+
+
+void loop() {
+  float t = sht31.readTemperature();
+  float h = sht31.readHumidity();
+
+  if (! isnan(t)) {  // check if 'is not a number'
+    Serial.print("Temp *C = "); Serial.println(t);
+  } else { 
+    Serial.println("Failed to read temperature");
+  }
+  
+  if (! isnan(h)) {  // check if 'is not a number'
+    Serial.print("Hum. % = "); Serial.println(h);
+  } else { 
+    Serial.println("Failed to read humidity");
+  }
+  Serial.println();
+  delay(1000);
+}